• (0)
  • Basket
  • 0.00

No job too small so give us a call on:

01476 848488



Call 01476848488 to place your order


Add to Basket
Belton Summerhouse Loglap

Built using t&g Loglap with its stylish half round exterior cladding gives this delightful Summerhouse the look similar to that of a log cabin at a fraction of the cost. With its overhanging roof this Summerhouse is a pleasure to make more use of your garden on warm summer evenings. 

This traditional looking Summer House with its Apex style roof is made from quality 22mm t&g Loglap cladding and 50x50mm heavy duty framing. The floor and roof is made from planed 16mm t&g boards as are all our buildings; we do not use cheap sheet materials such as OSB or chipboard. 

Included in this delightful summerhouse is two Belton range opening windows and one pair of matching Belton range French doors fitted with black antique door furniture, lock and keys.
To protect your garden Summer House the Apex roof is finished with heavy duty green mineral felt and all external faces are treated with a quality brush on solvent based water repellent in a choice of colours. As an alternative you can upgrade to tanalised cladding but it is advised an application of water repellent is applied once the building is fitted.

When choosing a location for your building remember to make allowances for roof overhangs, which are approximately 78mm all round. It is essential that a firm level base is prepared as an uneven base may cause problems such as instability and doors becoming unaligned. 

If you are looking for a building that is strong, robust and made to last then this is the one for you.

Key Features

• Ridge 7'6"
• Eaves 6'6"
• Framing 2"x2" throughout
• Cladding 22mm t&g Loglap
• Floor 16mm t&g
• Roof 16mm t&g
• Roof felt 45kg green mineral
• Belton double doors 1780 x 1092mm
• Belton range windows 1011 x 685mm
• Black antique effect door furniture, lock and keys
• Horticultural glass
• Externally treated with solvent based water repellent in a choice of colours

Note; all timber sizes are nominal and will be a few mm smaller when machined.
We offer a bespoke service but without the massive increase in cost so if you have designs or sizes of your own in mind why not ask us for a competitive quote. If you can draw it we can make it but don't worry if you can't just tell us.

Contact us for additional extras:

• Single Belton range door
• Veranda
• Scalloped Barge Boards
• Felt roof shingles
• Polycarbonate glazing
• Extra row increase by 100mm approx per board
• Tanalised cladding
• 22mm planed tongue and groove floor
• Insulate and line out with 16mm t&g boards
• Other cladding styles and thicknesses also available (Featheredge, 19mm-22mm t&g Shiplap, 25mm t&g V/board and 32mm Shiplap overlap POA)

If you can’t find what you’re looking for please contact us to discuss; if it’s not listed it doesn’t mean we don’t do it.